What your setup
needs to run
our platform
Nord2026 delivers cybersecurity outsourcing services through a browser-based interface. No proprietary software installation is required — access depends on meeting a small set of network and device conditions.
These requirements apply to client-side access, administrative dashboards, and secure communication channels used during service delivery.
System specifications
Minimum working conditions
Each category below reflects tested thresholds — not conservative estimates. Falling below these values may cause degraded performance or connection failures.
Operating System
The platform runs on any modern OS with a supported browser. No OS-level agent or kernel module is installed on client machines.
Browser
WebSockets and TLS 1.3 are required for real-time event streams. Browsers older than 2 years may not support the required cryptographic handshake.
Internet Connection
Dashboard access requires at least 5 Mbps downstream. Live incident response sessions with screen sharing need 15 Mbps or more for stable operation.
Hardware
The web interface is lightweight, but log analysis views and live dashboards render faster with adequate RAM. Shared or underpowered devices may lag on complex reports.
Firewall & Ports
Outbound HTTPS on port 443 must be open. Some enterprise firewalls block WebSocket upgrades — confirm with your network team before onboarding.
Authentication
Multi-factor authentication is mandatory for all accounts. TOTP apps are supported; SMS-based codes are accepted but not recommended for high-privilege roles.
Working through
VPN connections
The nord2026 platform is compatible with most commercial VPN solutions including NordVPN, Nord VPN configurations, and corporate tunnel setups. Users accessing the dashboard through a VPN should ensure the tunnel endpoint is geographically close to the server region assigned to their account.